US Manufacturer of Linear Bearings, Linear Actuators, Shafts, Rails & Guides
America’s top supplier of self-lubricating plain linear bearings, shafts, rails, guides, axial bearings, V-wheel systems, pillow blocks, ball bearings, slew ring bearings, lead screw actuators, ball screw actuators, and belt-driven actuators. All products are made at our Roscoe, Illinois factory, 90 miles west of Chicago, ensuring fast, reliable delivery with a quality guarantee.
Linear ball bearing, open shelled, with a 35mm ID JIS Metric, featuring a standard-sized heat-treated alloy steel shell that enhances durability and load capacity. Recommended over plain bearings in cantilevered applications as the 2:1 binding rule does not apply. Double seals add protection, a low coefficient of friction enables higher..
$90.74
Closed plain linear bearing with a JIS Metric 38mm ID, compensated with 0.0015" running clearance per side. Its green anodized aluminum shell ensures robust durability, while the FrelonGOLD® liner delivers self-lubricating, maintenance-free performance with vibration damping. Meets JIS metric tolerance standards for precision and compatibility Optional Frelon® J or W..
$74.87
Self-aligning closed plain linear bearing with a 38mm JIS compensated ID that has a 0.0015" running clearance per side. The green anodized aluminum shell ensures robust durability, while the FrelonGOLD® liner delivers self-lubricating, maintenance-free performance with vibration damping. Crowned outer diameter (OD) is self-aligning Meets JIS metric tolerance standards for..
$96.58
Lead Screw Linear Actuator 200mm long with a NEMA 14 Motor, RoundAnti-Backlash Nut, 10mm screw diameter, 5mm lead, and the screw is made from precision-rolled 300 Series Stainless Steel and coated with PTFE to prevent flaking and reduce friction. The Triangle Constant Force™ Anti-Backlash nut uses a spring to maintain..
$183.38
Double Linear Ball Bearing 20mm ID JIS Metric Square-Flanged, Center Mount equipped with a long heat-treated alloy steel shell for durability and double seals for added protection. With a low coefficient of friction for speed and a resin retainer polymer cage for reduced noise, this enhanced sized linear ball bearing..
$41.72
Linear Ball Bearing, Square Flanged and Double Sized, 20mm ID JIS Metric, with the flange mount at the end. Equipped with a long heat-treated alloy steel shell for durability and double seals for added protection. With a low coefficient of friction for speed and a resin retainer polymer cage for..
$49.21
Double-sized, Round Flanged Linear Ball Bearing 20mm ID JIS Metric, center mount, with a long heat-treated alloy steel shell for durability and double seals for added protection. With a low coefficient of friction for speed and a resin retainer polymer cage for reduced noise, this enhanced sized linear ball bearing..
$41.72
Linear Ball Bearing, Round End Flange, Double Sized, 20mm ID JIS Metric, equipped with a long heat-treated alloy steel shell for durability and double seals for added protection. With a low coefficient of friction for speed and a resin retainer polymer cage for reduced noise, this enhanced sized linear ball..
$49.26
Square Flanged Linear Ball Bearing with a 20mm ID, center mount and double wide design for higher cantilevered load capacity. The heat-treated alloy steel shell ensures durability, while the resin retainer polymer cage minimizes noise and the low coefficient of friction enhances speed. Temperature Range: -4/+176°F (-20/+80°C) Center Flange Mount..
$83.41
Square Flanged Linear Ball Bearing, End Mount with a 20mm ID and double wide design for higher cantilevered load capacity. The heat-treated alloy steel shell ensures durability, while the resin retainer polymer cage minimizes noise and the low coefficient of friction enhances speed. Temperature Range: -4/+176°F (-20/+80°C) End Flange Mount..
$70.35
Double Linear Ball Bearing 20mm ID Round-Flanged Center Mount featuring a heat-treated alloy steel shell for durability. With a low coefficient of friction and a resin retainer polymer cage, this enhanced sized linear ball bearing ensures smooth, quiet, high-speed operation and it has an advantage in cantilevered applications over plain..
$83.41
Double Linear Ball Bearing 20mm ID Round-Flanged End Mount featuring a heat-treated alloy steel shell for durability. With a low coefficient of friction and a resin retainer polymer cage, this enhanced sized linear ball bearing ensures smooth, quiet, high-speed operation and it has an advantage in cantilevered applications over plain..
$70.35
Linear Shaft of 440 Stainless Steel, 12mm diameter, 300mm length, made in the USA by PBC Linear®, featuring RC 50 Plus™ hardness and an optimized surface finish that enhances the performance of linear bearings such as self-lubricating plain bearings and ball bearings. Solid, not pre-drilled. Neither drilled nor tapped -..
$35.13
Linear Shaft of hardened carbon steel, 12mm diameter, 300mm length, made in the USA by PBC Linear® as Simplicity® 60 Plus steel. Featuring an optimized surface finish that enhances the performance of linear bearings such as self-lubricating plain bearings, ball bearings, roller bearing pillow blocks, and guide carriages. Solid, not..
$10.55
Linear Rail with stainless steel raceways, 12" long and 34mm (1.34") wide, from the Redi-Rail series of linear guides. Features a U-shaped aluminum alloy body with gothic archways for the corrosion-resistant raceways which are compatible with the RRS14PW carriage and its stainless steel rollers. Designed for compact setups in automation..
$53.82
Simplicity® Die Set Plain Linear Bearing with a compensated 32mm ISO Metric ID (inner diameter). The compensated running clearance on the inner diameter of 0.0015” per side; pairing well with another linear bearing on a parallel shaft that may not perfectly align. Such compensated ID bearings also allow for slightly..
$99.96
Low Profile Linear Slide - Mini-Rail LPM27-0750-1 Linear Rail Width: 27mm Length: 750mm Height: 12mm
$72.04
Low Profile Linear Slide Guide with a 27mm width, 750mm length and 12mm height, featuring anodized aluminum linear rails and molded polymer slider carriages with stainless steel threaded inserts, ensuring durability and resistance to contaminants, dyes, and weak acids. These miniature linear guides have a high load capacity, supporting up..
$72.04
Pre-Drilled Aluminum Linear Support Rail of 12" length, made for a 1/2" diameter linear shaft, sold separately. Cold Stamp manufactured in the PBC Linear® factory in Roscoe, IL USA. Use Open Linear Bearings on shafts fused with these support rails. Linear Support Rail only - Shafts sold separately Pre-Drilled according..
$54.74
Linear support rail, undrilled, 12" in length and made for a 1/2" diameter linear shaft, sold separately. A support rail is a linear rail on top of which shafts can handle heavy loads without sagging or binding. This solid aluminum rail, made in the USA with advanced cold stamp manufacturing,..
$30.67
Solid Linear Shaft of Ceramic Coated Aluminum, 20mm diameter, 300mm length. This feather-weight yet strong shaft boasts RC70 hardness, superior corrosion resistance, non-magnetic properties, vibration resistance, and immunity to weld splatter, paints, and contaminants. It’s crafted exclusively for plain bearings like Simplicity® self-lubricating linear bearings, not for linear ball bearings..
$19.51
PBC Linear is a major linear motion products manufacturer located in Roscoe, Illinois, 90 miles west of Chicago, specializing in linear bearings, shafts, rails, guides, and actuators, with expedited overnight delivery from our advanced facility. Since 1983, we have evolved from pioneering self-lubricating bearing technology to offering a diverse product range, supported by a 66,000-square-foot factory and over 15 pending patents driving innovation. Our automated production, powered by state-of-the-art CNC machining, ensures quick lead times, cost-effective solutions, and exceptional quality.
Recently Viewed Products
Exclusive section that stores the history of product views