US Manufacturer of Linear Bearings, Linear Actuators, Shafts, Rails & Guides
America’s top supplier of self-lubricating plain linear bearings, shafts, rails, guides, axial bearings, V-wheel systems, pillow blocks, ball bearings, slew ring bearings, lead screw actuators, ball screw actuators, and belt-driven actuators. All products are made at our Roscoe, Illinois factory, 90 miles west of Chicago, ensuring fast, reliable delivery with a quality guarantee.
Lead Screw Driven Linear Actuator including a NEMA 17 motor. This actuator utilizes a Gliding Surface Technology™ (GST) carriage with a self-lubricating FrelonGold® underliner on a 140mm length rail with a tall profile. It features a 2mm screw lead and an anti-backlash screw nut. GST carriage with self-lubricating FrelonGold® liner..
$731.31
Linear Ball Bearing, open shelled, with a 2" inner diameter (ID). Interchangeable with industry standards and our Simplicity series, this bearing has a low coefficient of friction, a heat-treated alloy steel shell for durability, and a resin retainer polymer cage to reduce noise. Open shell for use with rail supported..
$193.57
Linear rail, 45mm wide and 500mm long, from PBC Linear’s Commercial Rail series, featuring a U-shaped, roll-formed steel sheet design with zinc plating for corrosion resistance. This cost-effective rail supports the CR45MCA carriage, equipped with three hardened chrome steel roller bearings. Linear Rail Only - Carriage part number CR45MCA sold..
$27.01
Double Linear Ball Bearing 30mm ID JIS Metric Square-Flanged, Center Mount equipped with a long heat-treated alloy steel shell for durability and double seals for added protection. With a low coefficient of friction for speed and a resin retainer polymer cage for reduced noise, this enhanced sized linear ball bearing..
$101.65
Linear Ball Bearing, Square Flanged and Double Sized, 30mm ID JIS Metric, with the flange mount at the end. Equipped with a long heat-treated alloy steel shell for durability and double seals for added protection. With a low coefficient of friction for speed and a resin retainer polymer cage for..
$88.94
Double-sized, Round Flanged Linear Ball Bearing 30mm ID JIS Metric, center mount, with a long heat-treated alloy steel shell for durability and double seals for added protection. With a low coefficient of friction for speed and a resin retainer polymer cage for reduced noise, this enhanced sized linear ball bearing..
$101.65
Square Flanged Linear Ball Bearing with a 30mm ID, center mount and double wide design for higher cantilevered load capacity. The heat-treated alloy steel shell ensures durability, while the resin retainer polymer cage minimizes noise and the low coefficient of friction enhances speed. Center Flange Mount and Double Size to..
$203.32
Square Flanged Linear Ball Bearing, End Mount, with a 30mm ID and double wide design for higher cantilevered load capacity. The heat-treated alloy steel shell ensures durability, while the resin retainer polymer cage minimizes noise and the low coefficient of friction enhances speed. Temperature Range: -4/+176°F (-20/+80°C) End Flange Mount..
$171.51
Double Linear Ball Bearing 30mm ID Round-Flanged Center Mount featuring a heat-treated alloy steel shell for durability. With a low coefficient of friction and a resin retainer polymer cage, this enhanced sized linear ball bearing ensures smooth, quiet, high-speed operation and it has an advantage in cantilevered applications over plain..
$203.32
Double Linear Ball Bearing 30mm ID Round-Flanged, End Mount featuring a heat-treated alloy steel shell for durability. With a low coefficient of friction and a resin retainer polymer cage, this enhanced sized linear ball bearing ensures smooth, quiet, high-speed operation and it has an advantage in cantilevered applications over plain..
$171.51
Linear Shaft on a Rail - Ceramic Coated Aluminum CCR10-024.000-SL Diameter: 5/8" Length: 24"
$130.76
Linear rail and 5/8" diameter shaft, 24" in length, made from a single piece of feather-weight ceramic-coated aluminum. This one-piece gliding surface assembly is designed for self-lubricating Simplicity® linear bearings with FrelonGOLD® liners, which perform exceptionally in extreme conditions like dirt, heat, and vibration. The linear rail segment is pre-drilled..
$130.76
Linear Shaft on Rail - Ceramic-Coated Aluminum SRA10CC-024.000-SL Diameter: 5/8" Length: 24"
$198.78
Ceramic Coated Aluminum Linear Shaft with a 5/8" diameter and 24" length, fused onto an Aluminum Alloy Linear Rail. The shaft is feather-weight yet strong, boasting RC70 hardness, superior corrosion resistance, non-magnetic properties, vibration resistance, and immunity to splatter, paints, and contaminants. Use open bearing variants of Simplicity® self-lubricating plain..
$198.78
Linear Shaft made of 1060 Carbon Steel with a 5/8" diameter and 24" length, rated Class L for Precision Tolerance and Standards Compliance. Made in the USA by PBC Linear® as RC 60 Plus case-hardened steel, the shaft is not drilled nor tapped, but you can click "Configure & Quote"..
$26.60
Pre-Drilled Linear Support Rail of 36" length, made for a 5/8" diameter linear shaft, sold separately. Cold Stamp manufactured from aluminum in the PBC Linear® factory in Roscoe, IL USA. Use Open Linear Bearings on shafts fused with these support rails. Linear Support Rail only - Shafts sold separately Pre-Drilled..
$192.14
Linear support rail, undrilled, 36" in length and made for a 5/8" diameter linear shaft, sold separately. A support rail is a linear rail on top of which shafts can handle heavy loads without sagging or binding. This solid aluminum rail, made in the USA with advanced cold stamp manufacturing,..
$103.05
Linear Shaft of hardened carbon steel, 16mm diameter, 600mm length, made in the USA by PBC Linear® as Simplicity® 60 Plus steel. Featuring an optimized surface finish that enhances the performance of linear bearings such as self-lubricating plain bearings, ball bearings, roller bearing pillow blocks, and guide carriages. Solid, not..
$26.28
Pre-Drilled Linear Support Rail of 900mm length, made for a 16mm diameter linear shaft, sold separately. Cold Stamp manufactured from aluminum in the PBC Linear® factory in Roscoe, IL USA. Use Open Linear Bearings on shafts fused with these support rails. Linear Support Rail only - Shafts sold separately Pre-Drilled..
$251.73
Linear Rail with stainless steel raceways, 65mm wide and 250mm long, from the Redi-Rail series of linear guides. Features a U-shaped aluminum alloy body with gothic archways for the raceways which are compatible with the RRS65A-3R-SS carriage and its stainless steel rollers. Designed for compact setups in automation and robotics,..
$60.61
Linear Rail, 65mm wide and 250mm long, from the Redi-Rail series of linear guides, features a U-shaped aluminum alloy body with gothic arch hardened steel raceways. Designed for compact setups in automation and robotics, it includes pre-drilled mounting holes and is compatible with the RRS65 carriage. Linear Rail Only Compatible..
$47.86
Double Linear Ball Bearing, closed, with a 1.25" inner diameter (ID). Interchangeable with industry standards and our Simplicity series, this bearing has a low coefficient of friction, a heat-treated alloy steel shell for durability, and a resin retainer polymer cage to reduce noise. Double size equal to two standard bearings..
$151.77
PBC Linear is a major linear motion products manufacturer of linear bearings, shafts, rails, guides, and actuators, with expedited overnight delivery from our advanced facility near Rockford, Illinois. Since 1983, we have evolved from pioneering self-lubricating bearing technology to offering a diverse product range, supported by a 66,000-square-foot factory and over 15 pending patents driving innovation. Our automated production, powered by state-of-the-art CNC machining, ensures quick lead times, cost-effective solutions, and exceptional quality.
Recently Viewed Products
Exclusive section that stores the history of product views