Ball Screw Linear Actuator 2N23A-2000-048.000-ABXR Plain Linear Bearing Guide on 1.25″ Shafts of 48″ Length
- Shaft Diameter: 1.250 in
- MAX Horizontal Load (Fz): 34473 N
- Drive: Ball Screw
- Drive Input: NEMA 23
Ball screw linear slide actuator with NEMA 23 motor mount, two 1.25"×48" parallel, rail-supported alloy steel guide shafts, and a flat-top carriage for moving and accurately positioning loads. The motor mount accommodates a compatible NEMA 23 stepper motor, sold separately. For programmable operation, an external motor drive, motion controller, and suitable power supply are required to control position, speed, acceleration, and direction. The motor rotates a precision 16mm-diameter ball screw with a 0.25" right-hand lead, driving the carriage through a recirculating ball nut. Four Simplicity® plain linear bearing pillow blocks support the carriage along precision-ground shafts, with self-lubricating FrelonGOLD® PTFE-based liners providing smooth sliding guidance without metal-on-metal bearing contact or extra lubrication. The plain bearing design dampens vibration, absorbs shock loads, and tolerates dirt, dust, and extreme temperature variation while supporting heavy normal, moment, and cantilevered loads.
- Ball screw linear slide actuator with NEMA 23 motor mount
- Two parallel 1.25"×48" rail-supported alloy steel guide shafts
- Tall-profile linear slide with flat-top carriage
- NEMA 23 motor mount included; motor sold separately
- External drive and controller required for programming
- Programmable position, speed, acceleration and direction
- Compatible power supply and electrical connections required separately
- Precision 16mm-diameter ball screw with recirculating ball nut
- Ball screw lead: 0.25" right-hand (ABXR)
- Ball screw converts rotary motion into linear carriage movement
- Maximum horizontal carriage load: 34,473N (7,750lbf)
- Maximum stroke length: 965.20mm (38in)
- Four Simplicity® plain linear bearing pillow blocks
- Open-shell bearings accommodate continuously rail-supported shafts
- FrelonGOLD® PTFE-based liners provide self-lubricating motion
- No metal-on-metal bearing contact or extra bearing lubrication required
- Plain bearing design dampens vibration and absorbs shock loads
- Avoids catastrophic ball bearing failure by using sliding rather than rolling elements
- Suitable for dirt, dust and extreme temperature variation
- Twin-shaft guidance supports normal, moment and cantilevered loads
- Optional Frelon® J liners for corrosive environments
- Optional FDA-compliant Frelon® W liners
- Aluminum alloy carriage mounting plate and support rails
- Applications: Industrial automation, material handling and equipment positioning







