Twin Plain Linear Bearing Pillow Block - PWN24C 1.50″ Open, Self-Aligning, Compensated ID
Twin plain linear bearing pillow block, open, with a 1.5" compensated ID. This self-aligning, mountable aluminum alloy pillow block bearing uses a twin open-shelled design for added bearing surface and shaft support. The inserted open-shell Simplicity® plain bearing can tilt slightly within the housing to compensate for up to 1/2° misalignment from centerline in all directions, helping reduce binding from minor shaft deflection or parallel shaft misalignment. A bonded, self-lubricating FrelonGOLD® liner provides oil-free, maintenance-free motion in high temperatures, dirt, contamination, vibration, and shock loads. Eight pre-positioned mounting holes allow direct fastening to machinery or support structures.
- Compensated ID running clearance: 0.0015" per side
- Twin design resembles two standard blocks positioned end to end
- Greater bearing surface for added shaft support and load-carrying capacity
- Open design provides clearance for rail-supported shafts and profiled rails
- Mountable aluminum alloy housing with 8 pre-positioned mounting holes
- Inserted open-shell Simplicity® plain bearing with anodized aluminum shell
- Self-lubricating FrelonGOLD® liner for maintenance-free harsh-duty operation
- Oil-free design eliminates grease maintenance, washout, and buildup
- Bonded-liner design resists dirt, vibration, shock loads, and debris ingress
- Temperature rating: -400°F/+400°F or -240°C/+204°C
- Optional liners: chemical-resistant Frelon®J and FDA-compliant Frelon®W
Product Dimensions
| Approx. Weight | width | length | height |
|---|---|---|---|
| 5.8 lbs | 2.37 in | 3 in | 2.22 in |
Additional Dimensions
Customers also purchased
Twin plain linear bearing pillow block, open, with a 1.5" precision ID. This self-aligning, mountable aluminum alloy pillow block bearing uses a twin open-shelled design for added bearing surface and shaft support. The inserted open-shell Simplicity® plain bearing can tilt slightly within the housing to compensate for up to 1/2°..
$393.03
Plain linear bearing pillow block, open, with a 1.5" compensated ID for round shafts. This self-aligning, mountable, standard-sized pillow block features an inserted Simplicity® plain bearing within an aluminum alloy housing. The self-lubricating FrelonGOLD® bore liner provides oil-free, maintenance-free motion in harsh conditions such as extreme temperatures, dirt, contamination, vibration,..
$203.94
Linear Shaft on Rail - Ceramic-Coated Aluminum SRA24CC-018.000-SL Diameter: 1 1/2" Length: 18"
$292.97
Ceramic-Coated Aluminum Linear Shaft, Feather-Weight, featuring a 1.5" diameter and 18" length, fused onto an Aluminum Alloy Linear Rail. This assembly is designed for the open variants of the Simplicity® self-lubricating plain slide linear bearings or other plain bearings. The linear rail segment is pre-drilled for easy mounting, while the..
$292.97
Linear Shaft on Rail - Ceramic-Coated Aluminum SRA24CC-024.000-SL Diameter: 1 1/2" Length: 24"
$390.62
Ceramic Coated Aluminum Linear Shaft with a 1.5" diameter and 24" length, fused onto an Aluminum Alloy Linear Rail. The shaft is featherweight yet strong, boasting RC70 hardness, superior corrosion resistance, non-magnetic properties, vibration resistance, and immunity to splatter, paints, and contaminants. Use open versions of self-lubricating plain linear bearings..
$390.62
Linear Shaft on Rail - Ceramic-Coated Aluminum SRA24CC-036.000-SL Diameter: 1 1/2" Length: 36"
$585.94
Ceramic-Coated Aluminum Feather-Weight Linear Shaft featuring a 1.5" diameter and 36" length, fused onto an Aluminum Alloy Linear Rail. This assembly is designed for the open variants of the Simplicity® self-lubricating plain slide linear bearings or other plain bearings. The linear rail segment is pre-drilled for easy mounting, while the..
$585.94