Linear Ball Bearing IPS32 2.00″ Self Aligning Closed
Linear ball bearing with a 2" ID, self-aligning and closed-shelled, featuring a heat-treated alloy steel shell for durability and a resin retainer polymer cage for reduced noise. The self-aligning ball-track design helps accommodate minor shaft and housing misalignment, while the low coefficient of friction supports smooth, high-speed linear motion. Linear ball bearings perform well in cantilevered applications because the recirculating ball design handles overhung loads and offset drive forces without the same 2:1 binding limitation that applies to plain bearings. Standard double seals provide added protection at no extra cost, and the bearing operates from -4°F to 176°F (-20°C to 80°C). Available in 1/4" to 2" ID sizes and interchangeable with industry-standard dimensions.
| Part Number | IPS32 |
|---|---|
| Bearing Type | Self Aligning Linear Ball Bearing |
| Flange Type | |
| Flange Location | |
| Shaft Diameter | 2.00" Inch Series |
| Retainer Material | |
| Bearing Width | Standard Width |
| Bearing Modifications | Closed shell |
Customers also purchased
Open Linear Ball Bearing, self-aligning, with a 2" ID and a low coefficient of friction. Constructed with a heat-treated alloy steel shell, the resin retainer effectively reduces noise during operation, while double seals are included as standard at no additional cost. Open shell for use with rail supported round linear..
$221.63
Linear Shaft made of 1060 Carbon Steel with a 2" diameter and 16" length, rated Class L for Precision Tolerance and Standards Compliance. Made in the USA by PBC Linear® as RC 60 Plus case-hardened steel, the shaft is not drilled nor tapped, but you can click "Configure & Quote"..
$138.83
Linear Shaft made of 1060 Carbon Steel with a 2" diameter and 24" length, rated Class L for Precision Tolerance and Standards Compliance. Made in the USA by PBC Linear® as RC 60 Plus case-hardened steel, the shaft is not drilled nor tapped, but you can click "Configure & Quote"..
$208.23
Linear Shaft made of 1060 Carbon Steel with a 2" diameter and 36" length, rated Class L for Precision Tolerance and Standards Compliance. Made in the USA by PBC Linear® as RC 60 Plus case-hardened steel, the shaft is not drilled nor tapped, but you can click "Configure & Quote"..
$312.35
Linear Shaft of 420 Stainless Steel with a 2" diameter and 12" length, featuring an optimized surface finish for self-lubricating Simplicity ® plain linear bearings and linear ball bearings. Manufactured to RC 50 Plus, hardened stainless steel shaft is not drilled nor tapped. You can click "Configure & Quote" below..
$357.57
Linear Shaft of 420 Stainless Steel with a 2" diameter and 24" length, featuring an optimized surface finish for self-lubricating Simplicity ® plain linear bearings and linear ball bearings. Manufactured to RC 50 Plus, hardened stainless steel shaft is not drilled nor tapped. You can click "Configure & Quote" below..
$715.12
Linear Shaft of 420 Stainless Steel with a 2" diameter and 36" length, featuring an optimized surface finish for self-lubricating Simplicity ® plain linear bearings and linear ball bearings. Manufactured to RC 50 Plus, hardened stainless steel shaft is not drilled nor tapped. You can click "Configure & Quote" below..
$1,072.69
Linear Shaft of 440 Stainless Steel with a 2" diameter and 24" length, featuring an optimized surface finish for self-lubricating Simplicity® plain linear bearings and linear ball bearings. Made in the USA by PBC Linear® as RC 50 Plus™ hardened stainless steel, the shaft is not drilled nor tapped. You..
$466.99
Linear Shaft of 440 Stainless Steel with a 2" diameter and 48" length, featuring an optimized surface finish for self-lubricating Simplicity® plain linear bearings and linear ball bearings. Made in the USA by PBC Linear® as RC 50 Plus™ hardened stainless steel, the shaft is not drilled nor tapped. You..
$933.98
Linear Shaft of 440 Stainless Steel with a 2" diameter and 60" length, featuring an optimized surface finish for self-lubricating Simplicity® plain linear bearings and linear ball bearings. Made in the USA by PBC Linear® as RC 50 Plus™ hardened stainless steel, the shaft is not drilled nor tapped. You..
$1,167.47
Linear ball bearing, closed, with a 2" inner diameter (ID). Its ball bearing design provides high speed linear motion with a low coefficient of friction and offers an advantage in cantilevered applications where plain bearings may be limited by the 2:1 binding rule. The heat-treated alloy steel shell provides durability,..
$108.31
Adjustable linear ball bearing, closed, with a 2" inner diameter (ID). The adjustable split shell design lets users fine-tune fit and running clearance for smooth, accurate linear motion with a low coefficient of friction. Its ball bearing design offers an advantage in cantilevered applications where plain bearings may be limited..
$274.62
Double linear ball bearing, closed, with a 2" inner diameter (ID). The twin-size format equals two standard linear ball bearings mounted back-to-back for added stability. Its ball bearing design provides a low coefficient of friction and offers an advantage in cantilevered applications where plain bearings may be limited by the..
$233.62
Pre-Drilled Linear Shaft of 440 Stainless Steel with a 2" diameter and 24" length, made in the USA by PBC Linear® with Simplicity® RC 50 Plus Hardness™. Pre-drilled with industry-standard hole spacing, but no tapping has been done. Click Configure CAD and Quote for tapping or custom lengths. Optimized for..
$615.42
Pre-Drilled Linear Shaft of 440 Stainless Steel with a 2" diameter and 60" length, made in the USA by PBC Linear® with Simplicity® RC 50 Plus Hardness™. Pre-drilled with industry-standard hole spacing, but no tapping has been done. Click Configure CAD and Quote for tapping or custom lengths. Optimized for..
$1,538.56