Linear Shaft of Carbon Steel - NIL24-036.000-SL Class L Diameter: 1 1/2″ Length: 36″
Linear shaft of 1060 carbon steel with 1.5" diameter and 36" length, solid, round and undrilled, featuring RC 60 Plus™ case-hardened steel and Class L diameter tolerance for a controlled bearing fit. Made in the USA by PBC Linear®, this shaft is not tapped, which means it has no internally threaded hole at either end for accepting a screw or bolt. Use the “Configure Custom Features” button below to request end tapping, custom lengths or other shaft modifications. The hardened, optimized running surface is suitable for roller bearing pillow blocks, linear ball bearings, and self-lubricating Simplicity® plain linear bearings.
- 1060 carbon steel round linear shaft, solid and undrilled
- 1.5" diameter and 36" length
- Not tapped, meaning there is no internally threaded hole at either shaft end
- RC 60 Plus™ case-hardened running surface
- Class L diameter tolerance for controlled bearing fit
- Compatible with roller pillow blocks, linear ball bearings, and plain linear bearings
- Made in the USA by PBC Linear®
- Length tolerance: ±0.06"
- Request custom lengths, end tapping, other modifications with the Custom button
Available Lengths:
Share
Customers also purchased
Pre-Drilled Linear Support Rail of 36" length, made for a 2" diameter linear shaft, sold separately. Cold Stamp manufactured from aluminum in the PBC Linear® factory in Roscoe, IL USA. Use open shell linear bearings on shafts fused with these support rails. Linear Support Rail only - Shafts sold separately..
$444.24
Low Profile Steel Linear Support Rail for Shafts of 1.5" Diameter. Linear rail length is 36" Linear Support Rail Length: 36" Low Profile: 40% lower than other support rails AISI C-1018 Carbon Steel (0.18% carbon w/ high strength and ductility) Supports a Linear Shaft of Diameter: 1.5" Consult Configuration CAD..
$70.87
Low Profile Steel Linear Support Rail for Shafts of 2" Diameter. Linear rail length is 24" Linear Support Rail Length: 24" Low Profile: 40% lower than other support rails AISI C-1018 Carbon Steel (0.18% carbon w/ high strength and ductility) Supports a Linear Shaft of Diameter: 2" (sold separately) Consult..
$35.52
Linear ball bearing with a 1.5" ID, self-aligning and closed-shelled, featuring a heat-treated alloy steel shell for durability and a resin retainer polymer cage for reduced noise. The self-aligning ball-track design helps accommodate minor shaft and housing misalignment, while the low coefficient of friction supports smooth, high-speed linear motion. Linear..
$103.81
Linear Shaft Support Block made of Steel with 1.5" Diameter
Part Number
LSB24
Diameter
1 1/2"
Shaft Type
Steel End Support Block
$79.84
Linear Shaft End Support Block for a 1.5" diameter shaft
Part Number
NSB24
Diameter
1 1/2"
Shaft Type
Aluminum End Support Block
$61.67
Die set plain linear bearing, steel shelled, with a 1.5″ ID and a compensated running clearance of 0.0015″ per side in a closed, standard-width design. Features a round flange and self-lubricating FrelonGOLD® liner as standard, which provides optimal performance in extreme conditions such as dirt, heat and vibration. Typical high..
$172.89
Die set plain linear bearing with a 1.5″ ID (inner diameter), a precision running clearance of 0.0005″ per side and a closed aluminum shell. Features a round flange and self-lubricating FrelonGOLD® liner as standard, which provides optimal performance in extreme conditions such as dirt, heat and vibration. An optional Frelon®J..
$107.29
Die set plain linear bearing with a 1.5″ id (inner diameter), a compensated running clearance of 0.0015″ per side and a closed, aluminum shell. Features a round flange and self-lubricating FrelonGOLD® liner as standard, which provides optimal performance in extreme conditions such as dirt, heat and vibration. An optional Frelon®J..
$107.29
Die set plain linear bearing, steel shelled, with a 1.5″ inner diameter, a precision running clearance of 0.0005″ per side and a closed, standard-width design. Features a round flange and self-lubricating FrelonGOLD® liner as standard, which provides optimal performance in extreme conditions such as dirt, heat and vibration. Typical applications..
$172.89
Double die set plain linear bearing, steel shelled, with a 1.5″ ID and a precision running clearance of 0.0005″ per side. Features a closed, double sized design with a round flange in the center, as well as a self-lubricating FrelonGOLD® liner that provides optimal performance in extreme conditions such as..
$312.43
Double Die Set Plain Linear Bearing - Steel Shell DDSZ24C 1.50" Compensated ID, Round Flange Center
$312.43
Double die set plain linear bearing, steel shelled, with a 1.5″ ID and a compensated running clearance of 0.0015″ per side. Features a closed, double sized design with a round flange in the center, as well as a self-lubricating FrelonGOLD® liner that provides optimal performance in extreme conditions such as..
$312.43
Plain linear bearing, closed, with a 1.5" precision ID (inner diameter) that provides a 0.0005" running clearance per side on matching round shafts. Encased in a standard cylindrical anodized aluminum shell, this bearing features a bonded Simplicity® self-lubricating FrelonGOLD® bore liner for maintenance-free linear, rotational, and oscillating motion in harsh..
$74.87
Plain linear bearing, closed, with a 1.5" compensated ID that provides a 0.0015" running clearance per side on matching round shafts. Encased in a standard cylindrical anodized aluminum shell, this bearing features a bonded Simplicity® self-lubricating FrelonGOLD® bore liner for maintenance-free linear, rotational, and oscillating motion in harsh environments where..
$74.87