Linear Shaft of 440C Stainless Steel NIL24SS-018.000-SL Diameter: 1 1/2″ Length: 18″
Linear Shaft of 440C Stainless Steel with a 1.5" diameter and 18" length, round, solid and undrilled, featuring an optimized surface finish for self-lubricating Simplicity® plain linear bearings and linear ball bearings. Made in the USA by PBC Linear® as RC 50 Plus™ hardened stainless steel, the shaft is not drilled nor tapped, but you can directly order the NIPDL (inch) or NIPDM (metric) version of this product for standard-spaced pre-drilled holes and/or use the Custom button for non-standard drilling, tapping, or custom shaft lengths.
- Solid, undrilled round 440C stainless steel linear shaft
- 1.5" diameter and 18" length
- RC 50 Plus™ hardened running surface
- Optimized for Simplicity® plain linear bearings and linear ball bearings
- Not drilled or tapped (no threaded holes at either end)
- No internally threaded hole at either shaft end
- For pre-drilled alternatives, choose the NIPDL inch series or NIPDM metric series
- For special drilling, tapping, custom lengths, and other modifications, use the Custom button
- Length tolerance: ±0.060"
- Made in the USA by PBC Linear®
Available Lengths:
Share
Customers also purchased
Linear support rail, undrilled, 18" in length and made for a 1.5" diameter linear shaft, sold separately. A support rail is a linear rail on top of which shafts can handle heavy loads without sagging or binding. This solid aluminum rail, made in the USA with advanced cold stamp manufacturing,..
$115.57
Pre-Drilled Linear Support Rail of 18" length, made for a 1.5" diameter linear shaft, sold separately. Cold Stamp manufactured from aluminum in the PBC Linear® factory in Roscoe, IL USA. Use open shell linear bearings on shafts fused with these support rails. Linear Support Rail only - Shafts sold separately..
$173.80
Linear ball bearing with a 1.5" ID, self-aligning and closed-shelled, featuring a heat-treated alloy steel shell for durability and a resin retainer polymer cage for reduced noise. The self-aligning ball-track design helps accommodate minor shaft and housing misalignment, while the low coefficient of friction supports smooth, high-speed linear motion. Linear..
$103.81
Linear Shaft Support Block made of Steel with 1.5" Diameter
Part Number
LSB24
Diameter
1 1/2"
Shaft Type
Steel End Support Block
$79.84
Linear Shaft End Support Block for a 1.5" diameter shaft
Part Number
NSB24
Diameter
1 1/2"
Shaft Type
Aluminum End Support Block
$61.67
Plain linear bearing stainless steel pillow block, open, 1.5" compensated ID with a running clearance of 0.0015" per side. This non-self-aligning, mountable, standard-sized pillow block bearing uses a straight-bore stainless steel housing with an inserted open-shell stainless steel Simplicity® plain bearing. The self-lubricating FrelonJ® liner is FDA compliant for use..
$1,063.80