Linear Shaft of 440C Stainless Steel NIL08SS-012.000-SL Diameter: 1/2″ Length: 12″
Linear shaft of 440C stainless steel with 1/2" diameter and 12" length. The solid, undrilled round shaft features RC 50 Plus™ hardness and an optimized surface finish for Simplicity® self-lubricating plain linear bearings and linear ball bearings. This shaft is not tapped, meaning it has no internally threaded hole at either end for accepting a screw or bolt. For pre-drilled alternatives with standard hole spacing, choose the NIPDL inch series or NIPDM metric series. For special drilling, tapping, custom lengths, and other modifications, use the Custom button.
- Solid, undrilled round 440C stainless steel linear shaft
- 1/2" diameter and 12" length
- RC 50 Plus™ hardened running surface
- Optimized for Simplicity® plain linear bearings and linear ball bearings
- Not drilled or tapped
- Tapping creates internal screw threads in a hole at one or both shaft ends
- For pre-drilled alternatives, choose the NIPDL inch series or NIPDM metric series
- For special drilling, tapping, custom lengths, and other modifications, use the Custom button
- Length tolerance: ±0.030"
- Made in the USA by PBC Linear®
Available Lengths:
Customers also purchased
Closed linear ball bearing with a 1/2" ID, self-aligning, featuring a heat-treated alloy steel shell and resin retainer for reduced noise. It offers a low coefficient of friction, includes double seals at no extra cost, and operates from -4°F to 176°F (-20°C to 80°C). Variants available in sizes from 1/4"..
$24.80
Double round-flanged-end linear ball bearing, 8mm ID ISO metric, with a long heat-treated alloy steel shell for higher load and moment capacity. Equivalent to two standard-sized bearings mounted back to back, the round end flange allows flexible rotational positioning during installation and avoids corner interference in tight spaces. Recirculating hardened..
$32.99
Round Flanged Linear Ball Bearing with an 8mm ID JIS Metric and standard width, featuring an end-mounted flange, a heat-treated alloy steel shell for durability and double seals for enhanced protection. Boasts a low coefficient of friction for speed and a resin retainer polymer cage for reduced noise. Excels in..
$19.85
Square-flanged linear ball bearing, 8mm ID ISO metric, standard-sized, end mount, with a closed heat-treated alloy steel shell for durability on end-supported shafts. The square flange provides secure four-bolt mounting, while recirculating hardened steel balls and a low coefficient of friction support smooth, high-speed travel. A resin retainer polymer cage..
$19.85
Linear ball bearing with a JIS 8mm ID, square flanged end-mount standard sized housing, heat-treated alloy steel shell, quiet resin retainer polymer cage, and double seals included as standard. Built to Japanese Industrial Standards, the recirculating ball design provides low-friction, high-speed linear motion and can outperform plain bearings in cantilevered..
$19.85
Round-flanged linear ball bearing, 8mm ID ISO metric, standard-sized, end mount, with a heat-treated alloy steel shell for durability. The round flange allows flexible rotational positioning during installation and avoids corner interference in tight spaces. Recirculating hardened steel balls and a low coefficient of friction support smooth, high-speed travel, while..
$19.85
Linear Shaft Support Block made of Steel with 1/2" Diameter
Part Number
LSB08
Diameter
1/2"
Shaft Type
Steel End Support Block
$37.44
Linear Shaft End Support Block for a 1/2" diameter shaft
Part Number
NSB08
Diameter
1/2"
Shaft Type
Aluminum Shaft End Support Block
$22.51