{"title":"Cam Followers (Track Rollers or Cam Rollers)","description":"\u003cp data-end=\"209\" data-start=\"0\"\u003eCam followers (track rollers), also referred to as cam roller bearings, are rolling-element bearings designed to guide and support moving loads by maintaining continuous contact with a cam or track surface that pushes or guides the follower. Stud-mounted and yoke-style configurations simplify installation and alignment. Stud-type cam followers include an integrated threaded stud that acts as the axle the roller rotates on, while also serving as the mounting feature that threads directly into a tapped hole or bracket, combining multiple parts into a single component. In contrast, yoke-type cam followers consist of the roller wheel only and require a separate shaft or pin to act as the axle, mounted within a yoke or housing. Stud-type assemblies are available with either concentric or eccentric studs, where concentric designs are used when mounting holes can be machined to tight tolerances (as close as +0.0000″ \/ −0.0005″) and eccentric cam followers feature an offset stud that allows the roller position to be adjusted during installation for proper alignment and load contact. Available in steel, chrome-plated, and stainless steel variants, cam followers are easy to mount and well suited for a wide range of applications, with sealed designs that retain lubrication and protect against contamination. A wide range of sizes is available to meet different load and mounting requirements. These components provide smooth rolling contact and reliable load support in applications with moderate loads and shock.\u003c\/p\u003e\n\u003cp\u003e\u003ca title='Blog Post: What is a Cam Follower?\"' href=\"https:\/\/pbclinear.com\/blogs\/blog\/what-is-a-cam-follower\"\u003eBlog Post: What is a Cam Follower?\u003c\/a\u003e\u003c\/p\u003e\n\u003c!----\u003e","products":[{"product_id":"6300060","title":"Yoke-Type Cam Follower (Track Roller\/Cam Roller) 6300060 - 0.432\" OD Yoke not included","description":"\u003cp\u003eCam Roller; a Yoke-Type Cam Follower with 0.432\" Outer Diameter (OD). Yoke not included. These track rollers are easy to mount and designed for various cam applications involving moderate loading and shock.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision manufacturing minimizes bearing failure and costly shutdowns\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eYoke not included\u003c\/li\u003e\n\u003cli\u003eDimensionally interchangeable with standard Cam Yoke Rollers\u003c\/li\u003e\n\u003cli\u003ePre-lubricated for applications between 5ºF–275ºF (-15ºC–135ºC)\u003c\/li\u003e\n\u003cli\u003eEquipped with corrosion-resistant additives\u003c\/li\u003e\n\u003cli\u003eCan be relubricated via lube holes and a groove in the inner race bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoth sides of the assembly must be supported to achieve full axial load rating\u003c\/li\u003e\n\u003cli\u003eSecurely fasten both end plates to prevent disassembly\u003c\/li\u003e\n\u003cli\u003eOne-sided mounting is acceptable with a flat washer, but not recommended.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428651000029,"sku":"6300060","price":23.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Yoke-Standard.jpg?v=1719603219"},{"product_id":"6300061","title":"Yoke-Type Cam Follower (Track Roller\/Cam Roller) 6300061 - 0.558\" OD Yoke not included","description":"\u003cp\u003eCam Roller for a Yoke-Type Cam Follower with 0.558\" Outer Diameter (OD). Yoke not included.  These track rollers are easy to mount and designed for applications involving moderate loading and shock.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision manufacturing minimizes bearing failure and costly shutdowns\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eYoke not included\u003c\/li\u003e\n\u003cli\u003eDimensionally interchangeable with standard Cam Yoke Rollers\u003c\/li\u003e\n\u003cli\u003ePre-lubricated for applications between 5ºF–275ºF (-15ºC–135ºC)\u003c\/li\u003e\n\u003cli\u003eEquipped with corrosion-resistant additives\u003c\/li\u003e\n\u003cli\u003eCan be relubricated via lube holes and a groove in the inner race bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoth sides of the assembly must be supported to achieve full axial load rating\u003c\/li\u003e\n\u003cli\u003eSecurely fasten both end plates to prevent disassembly\u003c\/li\u003e\n\u003cli\u003eOne-sided mounting is acceptable with a flat washer, but not recommended.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428651032797,"sku":"6300061","price":24.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Yoke-Standard_25e20846-73ad-4006-b115-80ade8d93c79.jpg?v=1719603223"},{"product_id":"6300062","title":"Stud Cam Follower – Track Roller Bearing 1\/2\" OD - 6300062","description":"\u003cp\u003eFixed concentric cam roller featuring a 1\/2\" outer diameter and made for high temperatures. This stud cam follower is designed for easy mounting, making it ideal for a variety of cam or track roller applications that involve moderate loading and shock. It is especially recommended for scenarios where the stud hole can be machined with precision, within +0.0000\" and -0.0005\". The concentric collar acts as a locking mechanism, centering the bearing bore to reduce vibration and prevent shaft run-out during operation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2\" OD (outer diameter) cam roller\/track roller\u003c\/li\u003e\n\u003cli\u003eMade of high-carbon chrome bearing steel\u003c\/li\u003e\n\u003cli\u003eConcentric studded cam follower in a fixed assembly\u003c\/li\u003e\n\u003cli\u003eEasy to mount\u003c\/li\u003e\n\u003cli\u003eIdeal for moderate loading and shock applications\u003c\/li\u003e\n\u003cli\u003eRecommended for precise stud hole machining (+0.0000\" to -0.0005\")\u003c\/li\u003e\n\u003cli\u003eConcentric collar reduces vibration and prevents shaft run-out\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428651098333,"sku":"6300062","price":25.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Follower-Standard.jpg?v=1719603226"},{"product_id":"6300063","title":"Stud Cam Follower – Track Roller Bearing 1\/2\" OD - 6300063 Adjustable","description":"\u003cp\u003eAdjustable cam roller bearing featuring a 1\/2\" outer diameter. This eccentric stud cam follower is designed for easy mounting, making it ideal for a variety of cam or track roller applications that involve moderate loading and shock. It is especially recommended for scenarios where the stud hole can be machined with precision, within +0.0000\" and -0.0005\". The concentric collar acts as a locking mechanism, centering the bearing bore to reduce vibration and prevent shaft run-out during operation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2\" OD (outer diameter) cam roller\/track roller\u003c\/li\u003e\n\u003cli\u003eMade of high-carbon chrome bearing steel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEccentric stud cam follower\u003c\/li\u003e\n\u003cli\u003eEasy to mount\u003c\/li\u003e\n\u003cli\u003eIdeal for moderate loading and shock applications\u003c\/li\u003e\n\u003cli\u003eRecommended for precise stud hole machining (+0.0000\" to -0.0005\")\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428651163869,"sku":"6300063","price":34.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Follower-Standard_d06327be-e5f1-4eee-a2c4-36e6b6fd3b32.jpg?v=1719603229"},{"product_id":"6300064","title":"Yoke-Type Cam Follower (Track Roller\/Cam Roller) 6300064 - 0.667\" OD Yoke not included","description":"\u003cp data-pm-slice=\"1 1 []\"\u003eCam roller bearing (yoke-type cam follower) with a 0.667″ outer diameter (OD), made for track roller applications involving moderate loads and intermittent shock. Yoke not included. High-carbon chrome bearing steel material ensures reliable performance in harsh operating environments (up to 275°F \/ 135°C) while delivering smooth rolling contact along cam profiles or track surfaces. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYoke not included\u003c\/li\u003e\n\u003cli\u003eBearing retains lubrication; prevents contamination\u003c\/li\u003e\n\u003cli\u003eMade of high carbon chrome bearing steel\u003c\/li\u003e\n\u003cli\u003ePrecision manufacturing minimizes bearing failure and costly shutdowns\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensionally interchangeable with standard Cam Yoke Rollers\u003c\/li\u003e\n\u003cli\u003ePre-lubricated for applications between 5ºF–275ºF (-15ºC–135ºC)\u003c\/li\u003e\n\u003cli\u003eEquipped with corrosion-resistant additives\u003c\/li\u003e\n\u003cli\u003eCan be relubricated via lube holes and a groove in the inner race bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoth sides of the assembly must be supported to achieve full axial load rating\u003c\/li\u003e\n\u003cli\u003eSecurely fasten both end plates to prevent disassembly\u003c\/li\u003e\n\u003cli\u003eOne-sided mounting is acceptable with a flat washer, but not recommended.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428651229405,"sku":"6300064","price":36.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Yoke-Standard_e4116c07-cbc6-43b9-b979-e98da4272670.jpg?v=1719603231"},{"product_id":"6300065","title":"Stud Cam Follower – Track Roller Bearing 5\/8\" OD - 6300065","description":"\u003cp\u003eFixed concentric cam roller featuring a 5\/8\" outer diameter and made for high temperatures. This stud cam follower is designed for easy mounting, making it ideal for a variety of cam or track roller applications that involve moderate loading and shock. It is especially recommended for scenarios where the stud hole can be machined with precision, within +0.0000\" and -0.0005\". The concentric collar acts as a locking mechanism, centering the bearing bore to reduce vibration and prevent shaft run-out during operation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5\/8\" OD (outer diameter) cam roller\/track roller\u003c\/li\u003e\n\u003cli\u003eMade of high-carbon chrome bearing steel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConcentric studded cam follower in a fixed assembly\u003c\/li\u003e\n\u003cli\u003eEasy to mount\u003c\/li\u003e\n\u003cli\u003eIdeal for moderate loading and shock applications\u003c\/li\u003e\n\u003cli\u003eRecommended for precise stud hole machining (+0.0000\" to -0.0005\")\u003c\/li\u003e\n\u003cli\u003eConcentric collar reduces vibration and prevents shaft run-out\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428651294941,"sku":"6300065","price":25.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Follower-Standard_960e2a79-5371-4dae-8cbe-8efba25729b6.jpg?v=1719603234"},{"product_id":"6300066","title":"Stud Cam Follower – Track Roller Bearing 5\/8\" OD - 6300066  Adjustable","description":"\u003cp\u003eAdjustable cam roller bearing featuring a 5\/8\" outer diameter. This eccentric stud cam follower is designed for easy mounting, making it ideal for a variety of cam or track roller applications that involve moderate loading and shock. It is especially recommended for scenarios where the stud hole can be machined with precision, within +0.0000\" and -0.0005\". The concentric collar acts as a locking mechanism, centering the bearing bore to reduce vibration and prevent shaft run-out during operation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5\/8\" OD (outer diameter) cam roller\/track roller\u003c\/li\u003e\n\u003cli\u003eMade of high-carbon chrome bearing steel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEccentric stud cam follower \u003c\/li\u003e\n\u003cli\u003eEasy to mount\u003c\/li\u003e\n\u003cli\u003eIdeal for moderate loading and shock applications\u003c\/li\u003e\n\u003cli\u003eRecommended for precise stud hole machining (+0.0000\" to -0.0005\")\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428651360477,"sku":"6300066","price":34.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Follower-Standard_ee737560-f62c-42a4-9f1f-48cd150cd06d.jpg?v=1719603237"},{"product_id":"6300067","title":"Yoke-Type Cam Follower (Track Roller\/Cam Roller) 6300067 - 0.850\" OD Yoke not included","description":"\u003cp data-pm-slice=\"1 1 []\"\u003eCam roller bearing (yoke-type cam follower) with a 0.850″ outer diameter (OD), made for track roller applications involving moderate loads and intermittent shock. Yoke not included. High-carbon chrome bearing steel material ensures reliable performance in harsh operating environments (up to 275°F \/ 135°C) while delivering smooth rolling contact along cam profiles or track surfaces. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYoke not included\u003c\/li\u003e\n\u003cli\u003eBearing retains lubrication; prevents contamination\u003c\/li\u003e\n\u003cli\u003eMade of high carbon chrome bearing steel\u003c\/li\u003e\n\u003cli\u003ePrecision manufacturing minimizes bearing failure and costly shutdowns\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensionally interchangeable with standard Cam Yoke Rollers\u003c\/li\u003e\n\u003cli\u003ePre-lubricated for applications between 5ºF–275ºF (-15ºC–135ºC)\u003c\/li\u003e\n\u003cli\u003eEquipped with corrosion-resistant additives\u003c\/li\u003e\n\u003cli\u003eCan be relubricated via lube holes and a groove in the inner race bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoth sides of the assembly must be supported to achieve full axial load rating\u003c\/li\u003e\n\u003cli\u003eSecurely fasten both end plates to prevent disassembly\u003c\/li\u003e\n\u003cli\u003eOne-sided mounting is acceptable with a flat washer, but not recommended.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428651491549,"sku":"6300067","price":34.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Yoke-Standard_df0776e5-1861-4dbe-b6bb-3a3f4cb0eda5.jpg?v=1719603240"},{"product_id":"6300068","title":"Yoke-Type Cam Follower (Track Roller\/Cam Roller) 6300068 - 7\/8\" OD Sealed and Grooved","description":"\u003cp data-pm-slice=\"1 1 []\"\u003eSealed and grooved cam roller (yoke-type cam follower) with a 7\/8″ outer diameter (OD), made for track roller applications involving moderate loads and intermittent shock. Yoke not included. High-carbon chrome bearing steel material ensures reliable performance in harsh operating environments (up to 275°F \/ 135°C) while delivering smooth rolling contact along cam profiles or track surfaces. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYoke not included\u003c\/li\u003e\n\u003cli\u003eSealed and grooved bearing retains lubrication; prevents contamination\u003c\/li\u003e\n\u003cli\u003eMade of high carbon chrome bearing steel\u003c\/li\u003e\n\u003cli\u003ePrecision manufacturing minimizes bearing failure and costly shutdowns\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensionally interchangeable with standard Cam Yoke Rollers\u003c\/li\u003e\n\u003cli\u003ePre-lubricated for applications between 5ºF–275ºF (-15ºC–135ºC)\u003c\/li\u003e\n\u003cli\u003eEquipped with corrosion-resistant additives\u003c\/li\u003e\n\u003cli\u003eCan be relubricated via lube holes and a groove in the inner race bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoth sides of the assembly must be supported to achieve full axial load rating\u003c\/li\u003e\n\u003cli\u003eSecurely fasten both end plates to prevent disassembly\u003c\/li\u003e\n\u003cli\u003eOne-sided mounting is acceptable with a flat washer, but not recommended.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428651589853,"sku":"6300068","price":24.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Yoke-Standard_40f284d3-21f7-4585-9f42-30c4dba106f0.jpg?v=1719603243"},{"product_id":"6300069","title":"Yoke-Type Cam Follower (Track Roller\/Cam Roller) 6300069 - 1\" OD Sealed","description":"\u003cp data-pm-slice=\"1 1 []\"\u003eSealed cam roller (yoke-type cam follower) with a 1″ outer diameter (OD), made for track roller applications involving moderate loads and intermittent shock. Yoke not included. High-carbon chrome bearing steel material ensures reliable performance in elevated operating environments (up to 275°F \/ 135°C) while delivering smooth rolling contact along cam profiles or track surfaces. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYoke not included\u003c\/li\u003e\n\u003cli\u003eSealed bearing retains lubrication and prevents contamination\u003c\/li\u003e\n\u003cli\u003eMade of high carbon chrome bearing steel\u003c\/li\u003e\n\u003cli\u003ePrecision manufacturing minimizes bearing failure and costly shutdowns\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensionally interchangeable with standard Cam Yoke Rollers\u003c\/li\u003e\n\u003cli\u003ePre-lubricated for applications between 5ºF–275ºF (-15ºC–135ºC)\u003c\/li\u003e\n\u003cli\u003eEquipped with corrosion-resistant additives\u003c\/li\u003e\n\u003cli\u003eCan be relubricated via lube holes and a groove in the inner race bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoth sides of the assembly must be supported to achieve full axial load rating\u003c\/li\u003e\n\u003cli\u003eSecurely fasten both end plates to prevent disassembly\u003c\/li\u003e\n\u003cli\u003eOne-sided mounting is acceptable with a flat washer, but not recommended.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428651786461,"sku":"6300069","price":31.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Yoke-Standard_563962d0-3f68-4cc1-8246-26167b40eff4.jpg?v=1719603247"},{"product_id":"6300070","title":"Yoke-Type Cam Follower (Track Roller\/Cam Roller) 6300070 - 2\" OD Sealed","description":"\u003cp data-pm-slice=\"1 1 []\"\u003eSealed cam roller (yoke-type cam follower) with a 2″ outer diameter (OD), made for track roller applications involving moderate loads and intermittent shock. Yoke not included. High-carbon chrome bearing steel material ensures reliable performance in elevated operating environments (up to 275°F \/ 135°C) while delivering smooth rolling contact along cam profiles or track surfaces. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYoke not included\u003c\/li\u003e\n\u003cli\u003eSealed bearing retains lubrication and prevents contamination\u003c\/li\u003e\n\u003cli\u003eMade of high carbon chrome bearing steel\u003c\/li\u003e\n\u003cli\u003ePrecision manufacturing minimizes bearing failure and costly shutdowns\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensionally interchangeable with standard Cam Yoke Rollers\u003c\/li\u003e\n\u003cli\u003ePre-lubricated for applications between 5ºF–275ºF (-15ºC–135ºC)\u003c\/li\u003e\n\u003cli\u003eEquipped with corrosion-resistant additives\u003c\/li\u003e\n\u003cli\u003eCan be relubricated via lube holes and a groove in the inner race bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoth sides of the assembly must be supported to achieve full axial load rating\u003c\/li\u003e\n\u003cli\u003eSecurely fasten both end plates to prevent disassembly\u003c\/li\u003e\n\u003cli\u003eOne-sided mounting is acceptable with a flat washer, but not recommended.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428651917533,"sku":"6300070","price":87.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Yoke-Standard_984a562e-d9fd-4a89-9c15-7c3385094320.jpg?v=1719603250"},{"product_id":"6300071","title":"Yoke-Type Cam Follower (Track Roller\/Cam Roller) 6300071 - 7\/8\" OD Sealed","description":"\u003cp data-pm-slice=\"1 1 []\"\u003eSealed cam roller (yoke-type cam follower) with a 7\/8″ outer diameter (OD), made for track roller applications involving moderate loads and intermittent shock. Yoke not included. High-carbon chrome bearing steel material ensures reliable performance in elevated operating environments (up to 275°F \/ 135°C) while delivering smooth rolling contact along cam profiles or track surfaces. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYoke not included\u003c\/li\u003e\n\u003cli\u003eSealed bearing retains lubrication and prevents contamination\u003c\/li\u003e\n\u003cli\u003eMade of high carbon chrome bearing steel\u003c\/li\u003e\n\u003cli\u003ePrecision manufacturing minimizes bearing failure and costly shutdowns\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensionally interchangeable with standard Cam Yoke Rollers\u003c\/li\u003e\n\u003cli\u003ePre-lubricated for applications between 5ºF–275ºF (-15ºC–135ºC)\u003c\/li\u003e\n\u003cli\u003eEquipped with corrosion-resistant additives\u003c\/li\u003e\n\u003cli\u003eCan be relubricated via lube holes and a groove in the inner race bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoth sides of the assembly must be supported to achieve full axial load rating\u003c\/li\u003e\n\u003cli\u003eSecurely fasten both end plates to prevent disassembly\u003c\/li\u003e\n\u003cli\u003eOne-sided mounting is acceptable with a flat washer, but not recommended.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428652703965,"sku":"6300071","price":25.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Yoke-Standard_b283e97b-2022-4758-a7bb-51068b3ff69f.jpg?v=1719603254"},{"product_id":"6300072","title":"Yoke-Type Cam Follower (Track Roller\/Cam Roller) 6300072 - 1 1\/8\" OD Sealed","description":"\u003cp data-pm-slice=\"1 1 []\"\u003eSealed cam roller (yoke-type cam follower) with a 1 1\/8″ outer diameter (OD), made for track roller applications involving moderate loads and intermittent shock. Yoke not included. High-carbon chrome bearing steel material ensures reliable performance in elevated operating environments (up to 275°F \/ 135°C) while delivering smooth rolling contact along cam profiles or track surfaces. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYoke not included\u003c\/li\u003e\n\u003cli\u003eSealed bearing retains lubrication and prevents contamination\u003c\/li\u003e\n\u003cli\u003eMade of high carbon chrome bearing steel\u003c\/li\u003e\n\u003cli\u003ePrecision manufacturing minimizes bearing failure and costly shutdowns\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensionally interchangeable with standard Cam Yoke Rollers\u003c\/li\u003e\n\u003cli\u003ePre-lubricated for applications between 5ºF–275ºF (-15ºC–135ºC)\u003c\/li\u003e\n\u003cli\u003eEquipped with corrosion-resistant additives\u003c\/li\u003e\n\u003cli\u003eCan be relubricated via lube holes and a groove in the inner race bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoth sides of the assembly must be supported to achieve full axial load rating\u003c\/li\u003e\n\u003cli\u003eSecurely fasten both end plates to prevent disassembly\u003c\/li\u003e\n\u003cli\u003eOne-sided mounting is acceptable with a flat washer, but not recommended.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428652769501,"sku":"6300072","price":36.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Yoke-Standard_d1df8cf2-cd34-448a-9c41-351ea4475ffb.jpg?v=1719603257"},{"product_id":"6300073","title":"Yoke-Type Cam Follower (Track Roller\/Cam Roller) 6300073 - 1 3\/4\" OD Sealed","description":"\u003cp data-pm-slice=\"1 1 []\"\u003eSealed cam roller (yoke-type cam follower) with a 1 3\/4″ outer diameter (OD), made for track roller applications involving moderate loads and intermittent shock. Yoke not included. High-carbon chrome bearing steel material ensures reliable performance in elevated operating environments (up to 275°F \/ 135°C) while delivering smooth rolling contact along cam profiles or track surfaces. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYoke not included\u003c\/li\u003e\n\u003cli\u003eSealed bearing retains lubrication and prevents contamination\u003c\/li\u003e\n\u003cli\u003eMade of high carbon chrome bearing steel\u003c\/li\u003e\n\u003cli\u003ePrecision manufacturing minimizes bearing failure and costly shutdowns\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensionally interchangeable with standard Cam Yoke Rollers\u003c\/li\u003e\n\u003cli\u003ePre-lubricated for applications between 5ºF–275ºF (-15ºC–135ºC)\u003c\/li\u003e\n\u003cli\u003eEquipped with corrosion-resistant additives\u003c\/li\u003e\n\u003cli\u003eCan be relubricated via lube holes and a groove in the inner race bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoth sides of the assembly must be supported to achieve full axial load rating\u003c\/li\u003e\n\u003cli\u003eSecurely fasten both end plates to prevent disassembly\u003c\/li\u003e\n\u003cli\u003eOne-sided mounting is acceptable with a flat washer, but not recommended.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428652835037,"sku":"6300073","price":60.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Yoke-Standard_a7a60d27-a07e-46da-b0b0-d261e55ef740.jpg?v=1719603261"},{"product_id":"6300074","title":"Yoke-Type Cam Follower (Track Roller\/Cam Roller) 6300074 - 0.432\" OD Chrome Plated","description":"\u003cp data-pm-slice=\"1 1 []\"\u003eChrome plated cam roller with a 0.432″ outer diameter (OD), designed for yoke-type cam follower assemblies and track roller applications involving moderate loads and intermittent shock. Yoke not included. The Chrome Plating delivers smooth rolling contact along cam profiles or track roller surfaces. The base material is high carbon chrome bearing steel.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYoke not included\u003c\/li\u003e\n\u003cli\u003eChrome plating on high carbon chrome bearing steel\u003c\/li\u003e\n\u003cli\u003ePrecision manufacturing minimizes bearing failure and costly shutdowns\u003c\/li\u003e\n\u003cli\u003eDimensionally interchangeable with standard Cam Yoke Rollers\u003c\/li\u003e\n\u003cli\u003ePre-lubricated for applications between 5ºF–275ºF (-15ºC–135ºC)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCan be relubricated via lube holes and a groove in the inner race bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoth sides of the assembly must be supported to achieve full axial load rating\u003c\/li\u003e\n\u003cli\u003eSecurely fasten both end plates to prevent disassembly\u003c\/li\u003e\n\u003cli\u003eOne-sided mounting is acceptable with a flat washer, but not recommended.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428653326557,"sku":"6300074","price":125.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Yoke-Chrome-Plated.jpg?v=1719603265"},{"product_id":"6300075","title":"Yoke-Type Cam Follower (Track Roller\/Cam Roller) 6300075 - 0.432\" OD High Temperature","description":"\u003cp data-pm-slice=\"1 1 []\"\u003eHigh-temperature cam roller with a 0.432″ outer diameter (OD), designed for yoke-type cam follower assemblies and track roller applications involving moderate loads and intermittent shock. Yoke not included. The high-temperature configuration and high-carbon chrome bearing steel material ensures reliable performance in elevated operating environments (up to 275°F \/ 135°C) while delivering smooth rolling contact along cam profiles or track surfaces. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYoke not included\u003c\/li\u003e\n\u003cli\u003eMade of high carbon chrome bearing steel\u003c\/li\u003e\n\u003cli\u003ePrecision manufacturing minimizes bearing failure and costly shutdowns\u003c\/li\u003e\n\u003cli\u003eDimensionally interchangeable with standard Cam Yoke Rollers\u003c\/li\u003e\n\u003cli\u003ePre-lubricated for applications between 5ºF–275ºF (-15ºC–135ºC)\u003c\/li\u003e\n\u003cli\u003eEquipped with corrosion-resistant additives\u003c\/li\u003e\n\u003cli\u003eCan be relubricated via lube holes and a groove in the inner race bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoth sides of the assembly must be supported to achieve full axial load rating\u003c\/li\u003e\n\u003cli\u003eSecurely fasten both end plates to prevent disassembly\u003c\/li\u003e\n\u003cli\u003eOne-sided mounting is acceptable with a flat washer, but not recommended.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428653424861,"sku":"6300075","price":99.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Yoke-Standard_236a1d5e-3668-4906-ab40-aac0dcc13bab.jpg?v=1719603268"},{"product_id":"6300076","title":"Yoke-Type Cam Follower (Track Roller\/Cam Roller) 6300076 - 0.558\" OD Chrome Plated","description":"\u003cp data-pm-slice=\"1 1 []\"\u003eChrome plated cam roller with a 0.558″ outer diameter (OD), designed for yoke-type cam follower assemblies and track roller applications involving moderate loads and intermittent shock. Yoke not included. The Chrome Plating delivers smooth rolling contact along cam profiles or track roller surfaces. The base material is high carbon chrome bearing steel.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYoke not included\u003c\/li\u003e\n\u003cli\u003eChrome plating on high carbon chrome bearing steel\u003c\/li\u003e\n\u003cli\u003ePrecision manufacturing minimizes bearing failure and costly shutdowns\u003c\/li\u003e\n\u003cli\u003eDimensionally interchangeable with standard Cam Yoke Rollers\u003c\/li\u003e\n\u003cli\u003ePre-lubricated for applications between 5ºF–275ºF (-15ºC–135ºC)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCan be relubricated via lube holes and a groove in the inner race bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoth sides of the assembly must be supported to achieve full axial load rating\u003c\/li\u003e\n\u003cli\u003eSecurely fasten both end plates to prevent disassembly\u003c\/li\u003e\n\u003cli\u003eOne-sided mounting is acceptable with a flat washer, but not recommended.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428653490397,"sku":"6300076","price":30.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Yoke-Chrome-Plated_7c566840-5279-4511-a925-ffb6dba9e071.jpg?v=1719603272"},{"product_id":"6300077","title":"Yoke-Type Cam Follower (Track Roller\/Cam Roller) 6300077 - 0.558\" OD High Temperature","description":"\u003cp data-pm-slice=\"1 1 []\"\u003eHigh-temperature cam roller with a 0.558″ outer diameter (OD), designed for yoke-type cam follower assemblies and track roller applications involving moderate loads and intermittent shock. Yoke not included. The high-temperature configuration and high-carbon chrome bearing steel material ensures reliable performance in elevated operating environments (up to 275°F \/ 135°C) while delivering smooth rolling contact along cam profiles or track surfaces. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYoke not included\u003c\/li\u003e\n\u003cli\u003eMade of high carbon chrome bearing steel\u003c\/li\u003e\n\u003cli\u003ePrecision manufacturing minimizes bearing failure and costly shutdowns\u003c\/li\u003e\n\u003cli\u003eDimensionally interchangeable with standard Cam Yoke Rollers\u003c\/li\u003e\n\u003cli\u003ePre-lubricated for applications between 5ºF–275ºF (-15ºC–135ºC)\u003c\/li\u003e\n\u003cli\u003eEquipped with corrosion-resistant additives\u003c\/li\u003e\n\u003cli\u003eCan be relubricated via lube holes and a groove in the inner race bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoth sides of the assembly must be supported to achieve full axial load rating\u003c\/li\u003e\n\u003cli\u003eSecurely fasten both end plates to prevent disassembly\u003c\/li\u003e\n\u003cli\u003eOne-sided mounting is acceptable with a flat washer, but not recommended.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428653588701,"sku":"6300077","price":101.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Yoke-Standard_4639c100-5fb0-492a-bf27-86609dfd6a45.jpg?v=1719603275"},{"product_id":"6300078","title":"Stainless Steel Stud Cam Follower – Track Roller 6300078 - 1\/2\" OD Fixed Concentric","description":"\u003cp\u003eStainless Steel Cam Roller (stud-type cam follower) with a 1\/2\" outer diameter in a fixed assembly. These track rollers are designed for easy mounting, making them ideal for a variety of cam or track roller applications that involve moderate loading and shock. They are especially recommended for scenarios where the stud hole can be machined with precision, within +0.0000\" and -0.0005\". The concentric collar acts as a locking mechanism, centering the bearing bore to reduce vibration and prevent shaft run-out during operation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2\" outer diameter cam roller\u003c\/li\u003e\n\u003cli\u003eStainless Steel construction\u003c\/li\u003e\n\u003cli\u003eConcentric studded cam follower in a fixed assembly\u003c\/li\u003e\n\u003cli\u003eEasy to mount\u003c\/li\u003e\n\u003cli\u003eIdeal for moderate loading and shock applications\u003c\/li\u003e\n\u003cli\u003eRecommended for precise stud hole machining (+0.0000\" to -0.0005\")\u003c\/li\u003e\n\u003cli\u003eConcentric collar reduces vibration and prevents shaft run-out\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428653654237,"sku":"6300078","price":21.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Follower-Standard_91adfa20-8f8a-4e7b-ac9f-0c0b3027b57a.jpg?v=1719603279"},{"product_id":"6300079","title":"Stud Cam Follower – Track Roller Bearing 6300079 - 1\/2\" OD Fixed Concentric - High Temperature","description":"\u003cp\u003eFixed concentric cam roller featuring a 1\/2\" outer diameter and made for high temperatures. This stud cam follower is designed for easy mounting, making it ideal for a variety of cam or track roller applications that involve moderate loading and shock. It is especially recommended for scenarios where the stud hole can be machined with precision, within +0.0000\" and -0.0005\". The concentric collar acts as a locking mechanism, centering the bearing bore to reduce vibration and prevent shaft run-out during operation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/2\" OD (outer diameter) cam roller\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for high temperature environments\u003c\/li\u003e\n\u003cli\u003eConcentric studded cam follower in a fixed assembly\u003c\/li\u003e\n\u003cli\u003eEasy to mount\u003c\/li\u003e\n\u003cli\u003eIdeal for moderate loading and shock applications\u003c\/li\u003e\n\u003cli\u003eRecommended for precise stud hole machining (+0.0000\" to -0.0005\")\u003c\/li\u003e\n\u003cli\u003eConcentric collar reduces vibration and prevents shaft run-out\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428653719773,"sku":"6300079","price":30.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Follower-Standard_2901a305-c36c-443b-9be9-4bc5cf75f73f.jpg?v=1719603282"},{"product_id":"6300080","title":"Chrome Plated Stud Cam Follower – Track Roller 6300080 - 1\/2\" OD Adjustable","description":"\u003cp\u003eAdjustable Chrome Plated Cam Roller (1\/2\" OD) and Eccentric Studded Follower Adjustable Assembly. Ideal for situations where maintaining precise alignment is challenging, such as when the holes for mounting can’t be machined to tight tolerances. Eccentric cam followers help compensate for this by securely locking in place despite any slight misalignments. They also help compensate for widely varying loads. Their eccentric lip locks securely with the bearing's inner ring when the collar is rotated, creating a cam action.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEccentric Cam Follower Rollers are easy to mount and adjustable\u003c\/li\u003e\n\u003cli\u003eChrome Plated high-carbon chrome bearing steel\u003c\/li\u003e\n\u003cli\u003eDiameter: 1\/2\"\u003c\/li\u003e\n\u003cli\u003eLoad Ratings: Ideal for moderate loading and shock applications\u003c\/li\u003e\n\u003cli\u003eThese followers are not suitable for reversing rotation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428653818077,"sku":"6300080","price":36.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Follower-Standard_5f454100-9eea-48a0-9476-2354357c5f5e.jpg?v=1719603286"},{"product_id":"6300081","title":"Stud Cam Follower – Track Roller Bearing 1\/2\" OD 6300081 Adjustable - High Temperature","description":"\u003cp data-start=\"169\" data-end=\"549\"\u003eHigh-temperature adjustable cam roller bearing (track roller) with 1\/2″ OD. This eccentric stud cam follower is ideal for applications where maintaining precise alignment is difficult, such as when mounting holes cannot be machined to tight tolerances. The eccentric design allows the cam follower to compensate for minor positional errors and accommodate varying load conditions. Rotation of the eccentric collar produces a cam action that shifts the bearing position and then locks the eccentric lip securely against the bearing’s inner ring, providing stable positioning and reliable retention during operation. Manufactured from high-carbon chrome bearing steel.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEccentric Cam Followers are easy to mount and adjustable\u003c\/li\u003e\n\u003cli\u003eMade of high-carbon chrome bearing steel\u003c\/li\u003e\n\u003cli\u003eDesigned for High Temperature Environments\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: 1\/2\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoad Ratings: Ideal for moderate loading and shock applications\u003c\/li\u003e\n\u003cli\u003eFollowers are not recommended for reversing rotation nor oscillation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428654014685,"sku":"6300081","price":37.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Follower-Standard_163994c0-f2cf-4bb5-ba60-24c185677755.jpg?v=1719603290"},{"product_id":"6300082","title":"Yoke-Type Cam Follower (Track Roller\/Cam Roller) 6300082 - 0.667\" OD Chrome Plated","description":"\u003cp data-pm-slice=\"1 1 []\"\u003eChrome plated cam roller with a 0.667″ outer diameter (OD), designed for yoke-type cam follower assemblies and track roller applications involving moderate loads and intermittent shock. Yoke not included. The Chrome Plating delivers smooth rolling contact along cam profiles or track roller surfaces. The base material is high carbon chrome bearing steel.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYoke not included\u003c\/li\u003e\n\u003cli\u003eChrome plating on high carbon chrome bearing steel\u003c\/li\u003e\n\u003cli\u003ePrecision manufacturing minimizes bearing failure and costly shutdowns\u003c\/li\u003e\n\u003cli\u003eDimensionally interchangeable with standard Cam Yoke Rollers\u003c\/li\u003e\n\u003cli\u003ePre-lubricated for applications between 5ºF–275ºF (-15ºC–135ºC)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCan be relubricated via lube holes and a groove in the inner race bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoth sides of the assembly must be supported to achieve full axial load rating\u003c\/li\u003e\n\u003cli\u003eSecurely fasten both end plates to prevent disassembly\u003c\/li\u003e\n\u003cli\u003eOne-sided mounting is acceptable with a flat washer, but not recommended.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428654178525,"sku":"6300082","price":34.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Yoke-Chrome-Plated_77d99044-0bf7-4937-8fc9-0e1d0a66f29c.jpg?v=1719603294"},{"product_id":"6300083","title":"Yoke-Type Cam Follower (Track Roller\/Cam Roller) 6300083 - 0.667\" OD Stainless Steel","description":"\u003cp data-pm-slice=\"1 1 []\"\u003eStainless steel cam roller with a 0.667″ outer diameter (OD), designed for yoke-type cam follower assemblies and track roller applications involving moderate loads and intermittent shock. Yoke not included. The stainless steel withstands corrosive environments while delivering smooth rolling contact along cam profiles or track surfaces. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYoke not included\u003c\/li\u003e\n\u003cli\u003eMade of stainless steel\u003c\/li\u003e\n\u003cli\u003ePrecision manufacturing minimizes bearing failure and costly shutdowns\u003c\/li\u003e\n\u003cli\u003eDimensionally interchangeable with standard Cam Yoke Rollers\u003c\/li\u003e\n\u003cli\u003ePre-lubricated for applications between 5ºF–275ºF (-15ºC–135ºC)\u003c\/li\u003e\n\u003cli\u003eEquipped with corrosion-resistant additives\u003c\/li\u003e\n\u003cli\u003eCan be relubricated via lube holes and a groove in the inner race bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoth sides of the assembly must be supported to achieve full axial load rating\u003c\/li\u003e\n\u003cli\u003eSecurely fasten both end plates to prevent disassembly\u003c\/li\u003e\n\u003cli\u003eOne-sided mounting is acceptable with a flat washer, but not recommended.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428654342365,"sku":"6300083","price":69.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Yoke-Standard_a3e59212-7779-4255-bee3-4bd9c4c289fb.jpg?v=1719603298"},{"product_id":"6300084","title":"Chrome Plated Stud Cam Follower – Track Roller 6300084 - 5\/8\" OD Fixed Concentric","description":"\u003cp\u003eChrome Plated Cam Roller featuring a 5\/8\" outer diameter with a concentric studded cam follower in a fixed assembly. These cam rollers are designed for easy mounting, making them ideal for a variety of cam or track roller applications that involve moderate loading and shock. They are especially recommended for scenarios where the stud hole can be machined with precision, within +0.0000\" and -0.0005\". The concentric collar acts as a locking mechanism, centering the bearing bore to reduce vibration and prevent shaft run-out during operation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5\/8\" outer diameter cam roller - stud-type cam follower\u003c\/li\u003e\n\u003cli\u003eChrome plated high-carbon chrome bearing steel construction\u003c\/li\u003e\n\u003cli\u003eConcentric studded cam follower in a fixed assembly\u003c\/li\u003e\n\u003cli\u003eEasy to mount\u003c\/li\u003e\n\u003cli\u003eIdeal for moderate loading and shock applications\u003c\/li\u003e\n\u003cli\u003eRecommended for precise stud hole machining (+0.0000\" to -0.0005\")\u003c\/li\u003e\n\u003cli\u003eConcentric collar reduces vibration and prevents shaft run-out\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428654407901,"sku":"6300084","price":53.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Follower-Standard_20e1c695-0e2f-4415-b3e2-25acd3fae689.jpg?v=1719603303"},{"product_id":"6300085","title":"Stainless Steel Stud Cam Follower – Track Roller 6300085 - 5\/8\" OD Fixed Concentric","description":"\u003cp\u003eStainless Steel Cam Roller featuring a 5\/8\" outer diameter and includes a concentric studded cam follower in a fixed assembly. These cam rollers are designed for easy mounting, making them ideal for a variety of cam or track roller applications that involve moderate loading and shock. They are especially recommended for scenarios where the stud hole can be machined with precision, within +0.0000\" and -0.0005\". The concentric collar acts as a locking mechanism, centering the bearing bore to reduce vibration and prevent shaft run-out during operation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5\/8\" outer diameter cam roller\u003c\/li\u003e\n\u003cli\u003eSolid Stainless Steel construction\u003c\/li\u003e\n\u003cli\u003eConcentric studded cam follower in a fixed assembly\u003c\/li\u003e\n\u003cli\u003eEasy to mount\u003c\/li\u003e\n\u003cli\u003eIdeal for moderate loading and shock applications\u003c\/li\u003e\n\u003cli\u003eRecommended for precise stud hole machining (+0.0000\" to -0.0005\")\u003c\/li\u003e\n\u003cli\u003eConcentric collar reduces vibration and prevents shaft run-out\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428654801117,"sku":"6300085","price":28.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Follower-Standard_1be0cd1d-7cf4-47a4-afca-696b4342d36d.jpg?v=1719603307"},{"product_id":"6300086","title":"Chrome Plated Stud Cam Follower – Track Roller 6300086 - 5\/8\" OD Adjustable","description":"\u003cp data-start=\"169\" data-end=\"549\"\u003eChrome plated adjustable cam roller bearing (track roller) with 5\/8″ OD. This eccentric stud cam follower is ideal for applications where maintaining precise alignment is difficult, such as when mounting holes cannot be machined to tight tolerances. The eccentric design allows the cam follower to compensate for minor positional errors and accommodate varying load conditions. Rotation of the eccentric collar produces a cam action that shifts the bearing position and then locks the eccentric lip securely against the bearing’s inner ring, providing stable positioning and reliable retention during operation. Manufactured from high-carbon chrome bearing steel.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCam Followers are easy to mount and adjustable\u003c\/li\u003e\n\u003cli\u003eMade of high-carbon chrome bearing steel but chrome plated\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEccentric Stud Cam Follower\u003c\/li\u003e\n\u003cli\u003eLoad Ratings: Ideal for moderate loading and shock applications\u003c\/li\u003e\n\u003cli\u003eNot recommended for continuous reversing rotation or oscillation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428655227101,"sku":"6300086","price":53.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Follower-Standard_77480c9d-6ae0-47cf-b2e8-d7278ed019e5.jpg?v=1719603312"},{"product_id":"6300089","title":"Yoke-Type Cam Follower (Track Roller\/Cam Roller) 6300089 - 7\/8\" OD Stainless Steel - Grooved","description":"\u003cp\u003eStainless Steel Cam Roller with Groove 7\/8\" Outer Diameter OD. Yoke not included. The yoke-type cam followers are easy to mount and designed for various cam or track roller applications involving moderate loading and shock. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision manufacturing minimizes bearing failure and costly shutdowns\u003c\/li\u003e\n\u003cli\u003eSealed bearings retain lubrication and prevent contamination\u003c\/li\u003e\n\u003cli\u003eDimensionally interchangeable with standard Cam Yoke Rollers\u003c\/li\u003e\n\u003cli\u003ePre-lubricated for applications between 5ºF–275ºF (-15ºC–135ºC)\u003c\/li\u003e\n\u003cli\u003eEquipped with corrosion-resistant additives\u003c\/li\u003e\n\u003cli\u003eCan be relubricated via lube holes and a groove in the inner race bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoth sides of the assembly must be supported to achieve full axial load rating\u003c\/li\u003e\n\u003cli\u003eSecurely fasten both end plates to prevent disassembly\u003c\/li\u003e\n\u003cli\u003eOne-sided mounting is acceptable with a flat washer, but not recommended.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428655358173,"sku":"6300089","price":77.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Yoke-Standard_f0fba57b-83a2-4ed7-aa16-ee35085ea00e.jpg?v=1719603316"},{"product_id":"6300090","title":"Yoke-Type Cam Follower (Track Roller\/Cam Roller) 6300090 - 1\" OD Chrome Plated - Sealed","description":"\u003cp\u003eChrome Plated Sealed Cam Roller of 1\" Outer Diameter (OD). Yoke not included. These yoke-type cam followers are easy to mount and designed for various cam or track roller applications involving moderate loading and shock. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYoke not included. This is a yoke-type cam follower aka cam roller\u003c\/li\u003e\n\u003cli\u003ePrecision manufacturing minimizes bearing failure and costly shutdowns\u003c\/li\u003e\n\u003cli\u003eSealed bearings retain lubrication and prevent contamination\u003c\/li\u003e\n\u003cli\u003eDimensionally interchangeable with standard Cam Yoke Rollers\u003c\/li\u003e\n\u003cli\u003ePre-lubricated for applications between 5ºF–275ºF (-15ºC–135ºC)\u003c\/li\u003e\n\u003cli\u003eEquipped with corrosion-resistant additives\u003c\/li\u003e\n\u003cli\u003eCan be relubricated via lube holes and a groove in the inner race bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoth sides of the assembly must be supported to achieve full axial load rating\u003c\/li\u003e\n\u003cli\u003eSecurely fasten both end plates to prevent disassembly\u003c\/li\u003e\n\u003cli\u003eOne-sided mounting is acceptable with a flat washer, but not recommended.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428655456477,"sku":"6300090","price":39.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Yoke-Chrome-Plated_c88943e4-5718-4d67-a5f5-df44693d65ad.jpg?v=1719603320"},{"product_id":"6300091","title":"Yoke-Type Cam Follower (Track Roller\/Cam Roller) 6300091 - 7\/8\" OD Chrome Plated - Sealed","description":"\u003cp\u003eChrome Plated Sealed Cam Roller 7\/8\" Outer Diameter ( OD). Yoke not included. These yoke-type cam followers are easy to mount and designed for various cam or track roller applications involving moderate loading and shock.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision manufacturing minimizes bearing failure and costly shutdowns\u003c\/li\u003e\n\u003cli\u003eSealed bearings retain lubrication and prevent contamination\u003c\/li\u003e\n\u003cli\u003eDimensionally interchangeable with standard Cam Yoke Rollers\u003c\/li\u003e\n\u003cli\u003ePre-lubricated for applications between 5ºF–275ºF (-15ºC–135ºC)\u003c\/li\u003e\n\u003cli\u003eEquipped with corrosion-resistant additives\u003c\/li\u003e\n\u003cli\u003eCan be relubricated via lube holes and a groove in the inner race bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoth sides of the assembly must be supported to achieve full axial load rating\u003c\/li\u003e\n\u003cli\u003eSecurely fasten both end plates to prevent disassembly\u003c\/li\u003e\n\u003cli\u003eOne-sided mounting is acceptable with a flat washer, but not recommended.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428655554781,"sku":"6300091","price":54.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Yoke-Standard_551fd64a-f480-472a-b8ac-5eb0bdc1b333.jpg?v=1719603324"},{"product_id":"6300092","title":"Yoke-Type Cam Follower (Track Roller\/Cam Roller) 6300092 - 7\/8\" OD Stainless Steel - Sealed","description":"\u003cp\u003eStainless Steel Cam Yoke Roller 7\/8\" Outer Diameter OD - Sealed - Yoke not included. Cam Rollers and Cam Yoke Rollers are easy to mount and designed for various cam or track roller applications involving moderate loading and shock. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision manufacturing minimizes bearing failure and costly shutdowns\u003c\/li\u003e\n\u003cli\u003eSealed bearings retain lubrication and prevent contamination\u003c\/li\u003e\n\u003cli\u003eDimensionally interchangeable with standard Cam Yoke Rollers\u003c\/li\u003e\n\u003cli\u003ePre-lubricated for applications between 5ºF–275ºF (-15ºC–135ºC)\u003c\/li\u003e\n\u003cli\u003eEquipped with corrosion-resistant additives\u003c\/li\u003e\n\u003cli\u003eCan be relubricated via lube holes and a groove in the inner race bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoth sides of the assembly must be supported to achieve full axial load rating\u003c\/li\u003e\n\u003cli\u003eSecurely fasten both end plates to prevent disassembly\u003c\/li\u003e\n\u003cli\u003eOne-sided mounting is acceptable with a flat washer, but not recommended.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428655620317,"sku":"6300092","price":114.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Yoke-Standard_0e83e72e-d129-4975-83be-abfd7d1cdd17.jpg?v=1719603329"},{"product_id":"6300093","title":"Stainless Steel Stud Cam Follower – Track Roller 6300093 - 5\/8\" OD Adjustable","description":"\u003cp data-start=\"169\" data-end=\"549\"\u003eStainless steel adjustable cam roller bearing (track roller) with 5\/8″ OD. This eccentric stud cam follower is ideal for applications where maintaining precise alignment is difficult, such as when mounting holes cannot be machined to tight tolerances. The eccentric design allows the cam follower to compensate for minor positional errors and accommodate varying load conditions. Rotation of the eccentric collar produces a cam action that shifts the bearing position and then locks the eccentric lip securely against the bearing’s inner ring, providing stable positioning and reliable retention during operation. Manufactured from high-carbon chrome bearing steel.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCam Followers are easy to mount and adjustable\u003c\/li\u003e\n\u003cli\u003eMade of stainless steel\u003c\/li\u003e\n\u003cli\u003eDesigned for High Temperature Environments\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEccentric Stud Cam Follower\u003c\/li\u003e\n\u003cli\u003eLoad Ratings: Ideal for moderate loading and shock applications\u003c\/li\u003e\n\u003cli\u003eNot recommended for continuous reversing rotation or oscillation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428655718621,"sku":"6300093","price":70.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Follower-Standard_33f53297-93c0-4c93-a247-feff1d2a0225.jpg?v=1719603334"},{"product_id":"6300094","title":"Yoke-Type Cam Follower (Track Roller\/Cam Roller) 6300094 - 1 1\/8\" OD Chrome Plated - Sealed","description":"Chrome Plated Cam Yoke Roller 1 1\/8\" Outer Diameter OD - Sealed - Yoke not included. Cam Rollers and Cam Yoke Rollers are easy to mount and designed for various cam or track roller applications involving moderate loading and shock.\n\u003cul\u003e\n\u003cli\u003ePrecision manufacturing minimizes bearing failure and costly shutdowns\u003c\/li\u003e\n\u003cli\u003eSealed bearings retain lubrication and prevent contamination\u003c\/li\u003e\n\u003cli\u003eDimensionally interchangeable with standard Cam Yoke Rollers\u003c\/li\u003e\n\u003cli\u003ePre-lubricated for applications between 5ºF–275ºF (-15ºC–135ºC)\u003c\/li\u003e\n\u003cli\u003eEquipped with corrosion-resistant additives\u003c\/li\u003e\n\u003cli\u003eCan be relubricated via lube holes and a groove in the inner race bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBoth sides of the assembly must be supported to achieve full axial load rating\u003c\/li\u003e\n\u003cli\u003eSecurely fasten both end plates to prevent disassembly\u003c\/li\u003e\n\u003cli\u003eOne-sided mounting is acceptable with a flat washer, but not recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428656046301,"sku":"6300094","price":59.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Yoke-Standard_9fbbc98e-06b0-44a9-98e7-139e0e13f3a5.jpg?v=1719603338"},{"product_id":"6300096","title":"Stud Cam Follower – Track Roller Bearing 1-1\/8\" OD - 6300096 Adjustable","description":"\u003cp data-start=\"169\" data-end=\"549\"\u003eAdjustable cam roller bearing (track roller) with 1-1\/8″ OD. This eccentric stud cam follower is ideal for applications where maintaining precise alignment is difficult, such as when mounting holes cannot be machined to tight tolerances. The eccentric design allows the cam follower to compensate for minor positional errors and accommodate varying load conditions. Rotation of the eccentric collar produces a cam action that shifts the bearing position and then locks the eccentric lip securely against the bearing’s inner ring, providing stable positioning and reliable retention during operation. Manufactured from high-carbon chrome bearing steel.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEccentric Stud Cam Followers are easy to mount and adjustable\u003c\/li\u003e\n\u003cli\u003eMade of high-carbon chrome bearing steel\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: 1-1\/8\"\u003c\/li\u003e\n\u003cli\u003eLoad Ratings: Ideal for moderate loading and shock applications\u003c\/li\u003e\n\u003cli\u003eNot recommended for continuous reversing rotation or oscillation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428656177373,"sku":"6300096","price":38.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Follower-Standard_36da7fd6-9674-4909-8d25-120558743111.jpg?v=1719603342"},{"product_id":"6300097","title":"Stud Cam Follower – Track Roller Bearing 6300097 - 7\/8\" OD Adjustable","description":"\u003cp data-start=\"169\" data-end=\"549\"\u003eAdjustable cam roller bearing (track roller) with 7\/8″ OD. This eccentric stud cam follower is ideal for applications where maintaining precise alignment is difficult, such as when mounting holes cannot be machined to tight tolerances. The eccentric design allows the cam follower to compensate for minor positional errors and accommodate varying load conditions. Rotation of the eccentric collar produces a cam action that shifts the bearing position and then locks the eccentric lip securely against the bearing’s inner ring, providing stable positioning and reliable retention during operation. Manufactured from high-carbon chrome bearing steel.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCam Followers are easy to mount and adjustable\u003c\/li\u003e\n\u003cli\u003eMade of high-carbon chrome bearing steel\u003c\/li\u003e\n\u003cli\u003eDesigned for High Temperature Environments\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: 7\/8\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEccentric Stud Follower\u003c\/li\u003e\n\u003cli\u003eLoad Ratings: Ideal for moderate loading and shock applications\u003c\/li\u003e\n\u003cli\u003eNot recommended for continuous reversing rotation or oscillation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PBC Linear","offers":[{"title":"Default Title","offer_id":45428656603357,"sku":"6300097","price":32.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/files\/Rollers-CAM-Follower-Standard_72353d40-752d-4243-89b6-725e2ed7fa93.jpg?v=1719603346"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9808\/3549\/collections\/CAM_Followers.png?v=1771586081","url":"https:\/\/pbclinear.com\/collections\/cam-roller-yokes-and-followers.oembed?page=3","provider":"PBC Linear","version":"1.0","type":"link"}